Canon imageRUNNER ADVANCE C5560i III User Manual page 30

Step 12 Complete the Setup Guide.
When finishing the Setup Guide, restart the machine to apply the specified settings.
● If you do not use the Setup Guide, press <End Setup Guide> in Step 1.
● You can press to individually specify settings configured during the Setup Guide at a later time.
◼
Starting the Setup Guide later
The Setup Guide cannot be started in the following cases.
● If the user authentication or department ID authentication is set.
● If the DepartmentID Authentication is set.
● If the authentication with a card is performed.
<Management Settings>
● If you start the Setup Guide later and log in as an administrator, Step 3 will not be displayed. Proceed to Step
4.
Setting Up
● When printing is complete, or if you do not print a list, press <OK>.
● Press <OK> to restart the machine.
<License/Other> <Start Setup Guide>
16
<Start>