Setting Up The Connection Using Wps Push Button Mode - Canon imageRUNNER ADVANCE C5560i III User Manual

Setting Up the Connection Using WPS Push Button
Mode
If your wireless router supports the WPS (Wi-Fi Protected Setup) Push Button mode, you can easily set up a connection
with the WPS button on the router.
<Preferences>
Button Mode>
➠
When the wireless LAN router is detected and the configuration is complete, the screen <Connected.> will
be displayed.
● Depending on the networking device, you may need to press and hold the WPS button for 2 seconds or
longer. See the instruction manuals for your networking device for help.
● If the wireless router is set to use WEP authentication, you may not be able to set up connection using WPS.
Setting Up
<Network> <Wireless LAN>
press and hold the WPS button on the wireless router
30
<Wireless LAN Settings>
4XR3-00C
<WPS Push