●
When sending to an SMB server, the network connection was lost or the response on the server side
was slow, causing a wait time timeout on the machine side before the data could be sent or forwarding
could be completed. If this happens, you may be able to avoid a timeout by increasing the wait time.
4
Press <OK>.
5
Press <Specify SMB Client Version>, and select the SMB version used by the SMB
client.
6
Press <OK>.
7
Press
<Yes>.
●
When <Require Encryption for Connection> is set to <On>, the machine can only connect to SMB servers that
support SMB v3.0 encrypted communication. When <1.0> and <2.0> are set to <On> for <Specify SMB Client
Version> but <3.0> is not set to <On>, the machine cannot connect to SMB servers that do not support SMB
v3.0 encrypted communication.
●
Use the same version of SMB with the SMB server and SMB client. SMB cannot be used if the versions differ.
●
Depending on the network settings, an error may be displayed when sending to the SMB server. In this case,
adjust the time in <Timeout>.
LINKS
Making WINS Settings(P. 55)
Setting the Advanced Box of the Machine(P. 78)
Setting Up
54