Canon imageRUNNER ADVANCE C5560i III User Manual page 90

Hide thumbs Also See for imageRUNNER ADVANCE C5560i III:

Table of Contents

To use SMTP authentication, press <On>, enter the user name and password of the specified mail

accounts in <User Name> and <Password>.

User name and password

<User Name> and <Password> for <SMTP Authentication> are also used when forwarding received

Forwarding is performed as "Fixed Device Authentication" regardless of the <Information Used for

Authentication>

Authentication>(P. 1089) )

To encode communication using TLS when receiving e-mails and I-faxes using the SMTP server, press

<Always TLS> or <On>. When you don't want to receive data other than encoded data, select <Always

When sending e-mails and I-faxes, to display the user name and password entry screen, press <On>.

To encode the communication to/from the SMTP server using TLS, press <On>. When <On> is set, you

can confirm the TLS server certificate during communication with the server and add CN to the

verification items. <E-Mail/I-Fax Settings>

When setting SMTP authentication

Specify the authentication method using one of the following three methods.

Fixed Device Authentication

Entering the authentication information when sending

Registering information for each user

Fixed Device Authentication: When <User Name> and <Password> entered into <SMTP

Authentication (SMTP AUTH)> are used and the authentication screen (<Log in to SMTP Server>)

is not displayed when sending

Specify the settings as follows.

<User Name>: Enter the user name.

<Password>: Enter the password.

Entering the authentication information when sending: When <User Name> and <Password>

entered into <SMTP Authentication (SMTP AUTH)> are used and the authentication screen (<Log

in to SMTP Server>) is displayed when sending

<Information

<Confirm TLS Certificate for SMTP TX>(P. 1101)

Chapters

Table of Contents