Connecting To A Wired Lan - Canon imageRUNNER ADVANCE C5560i III User Manual

Connecting to a Wired LAN

Connect the machine to a computer via a router using a LAN cable.
● A router and LAN cable are not included with the machine, so please prepare them separately.
● The machine supports 1000BASE-T/100BASE-TX/10BASE-T Ethernet.
● To make a connection using 100BASE-TX/10BASE-T, use a category 5 twisted pair cable. It is recommended to
use an enhanced category 5 twisted pair cable to make a connection using 1000BASE-T.
● If devices supporting 1000BASE-T, 100BASE-TX and 10BASE-T are used together, a device (such as a switching
hub) supporting all of the Ethernet types you use is necessary. For more information, contact a person in
charge of service.
1
Connect the machine to a router using a LAN cable.
● Push the connector in until it clicks into place.
Connecting to a Wired LAN for the Sub Line
When <Wired LAN + Wired LAN> is selected in <Select Interface>, connect the wired LAN for the sub line.
<Select Interface>(P. 1061)
1
Connect the USB-LAN adapter to the USB port of the machine (located towards the back on the right side
of the machine).
● Multiple USB-LAN adapters cannot be connected.
● For information on the USB-LAN adapters that can be used, contact your local authorized Canon
dealer.
Setting Up
Parts and Their Functions(P. 91)
27
4XR3-009