Canon imageRUNNER ADVANCE C5560i III User Manual page 91

● <User Name> and <Password> entered into <SMTP Authentication (SMTP AUTH)> are entered as the
authentication information when sending.
● When <User Name> and <Password> for <SMTP Authentication (SMTP AUTH)> are not entered
(blank), the authentication information when sending is also blank.
● Specify the settings as follows.
●
●
●
●
●
Registering information for each user: When <Register Info. for Each User> is used and the
authentication screen (<Log in to SMTP Server>) is not displayed when sending
● SMTP authentication is performed using the user name and password registered in the local device.
● Specify the settings as follows.
●
●
●
3
Press <OK>.
4
Press <OK>.
● Depending on your environment, you might need to specify the SMTP/POP3 port number. For example, if
you are using Office 365, you need to set the SMTP sending port number to "587". For details, contact the
Internet service provider or the network administrators.
LINKS
Specifying E-Mail Settings(P. 559)
Using Internet Faxes (I-Fax)(P. 449)
<SMTP Authentication (SMTP AUTH)>: <On>
<User Name>: Enter the user name.
<Password>: Enter the password.
<Display Auth. Screen When Sending>: <On>
<Information Used for SMTP Server Authentication>(P. 1089) : <Device Settings>
<SMTP Authentication (SMTP AUTH)>: <On>
<Display Auth. Screen When Sending>: <Off>
<Information Used for SMTP Server Authentication>(P. 1089) : <Register Info. for Each
User>
Setting Up
77