Table of Contents
Advertisement
, - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
•
•
•
C534, C534i Self Powered Elliptical Fitness Crosstrainerl
Procedure 7.12 - Replacing a Stairarm
Warning: Care must be taken when work is being performed in the area of the stairarms. Pinch
points exist between the stairarm and ramp and between the stairarm and crankarm,
when the rear covers are removed.
1.
Procedure
1.
Set the on/off switch in the "off' position, then unplug the power cord from the wall outlet.
2.
Loosen and remove the two bolts that fasten the stairarm pedal onto the stairarm.
3.
Remove the stairarm pedal from the stairarm.
4.
Remove three bolts, washers and single nut that fasten the stairarm connector to the
stairarm. See Diagram 7.8.
Diagram 7.8 - Stairarm Connector Mounting
Secondary Link
5.
Remove the left and/or right cover sections per Procedure 7.20.
Page 47
Advertisement
Table of Contents
