Version 4.00 At Introduction - Agilent Technologies InfiniiVision 5000 Series Programmer's Manual

Version 4.00 at Introduction

The Agilent InfiniiVision 5000 Series oscilloscopes were introduced with
version 4.00 of oscilloscope operating software. The command set is
similar to the 6000 Series oscilloscopes (and the 54620/54640 Series
oscilloscopes before them) except that digital channels, rear- panel 10 Mhz
reference BNC input/output, and serial bus triggering/decode features are
not present.
Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Guide
1
What's New
29