Hardcopy:format - Agilent Technologies InfiniiVision 5000 Series Programmer's Manual

7
Obsolete and Discontinued Commands

:HARDcopy:FORMat

(see page 658)
Command Syntax
:HARDcopy:FORMat <format>
<format> ::= {BMP[24bit] | BMP8bit | PNG | CSV | ASCiixy | BINary
| PRINter0 | PRINter1}
The HARDcopy:FORMat command sets the hardcopy format type.
PRINter0 and PRINter1 are only valid when printers are connected to the
oscilloscope's USB ports. (The first printer connected/identified is
PRINter0 and the second is PRINter1.)
The :HARDcopy:FORMat command is an obsolete command provided for compatibility to
N O T E
previous oscilloscopes. Use the :SAVE:IMAGe:FORMat (see page 363),
:SAVE:WAVeform:FORMat (see page 370), and :HARDcopy:APRinter (see page 248)
commands instead.
Query Syntax
:HARDcopy:FORMat?
The :HARDcopy:FORMat? query returns the selected hardcopy format type.
Return Format
<format><NL>
<format> ::= {BMP | BMP8 | PNG | CSV | ASC | BIN | PRIN0 | PRIN1}
See Also • "Introduction to :HARDcopy Commands" on page 246
Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Guide 581