Agilent Technologies InfiniiVision 5000 Series Programmer's Manual page 103

Table 30 Standard Event Status Enable (ESE) (continued)
Bit
1
0
Query Syntax
*ESE?
The *ESE? query returns the current contents of the Standard Event
Status Enable Register.
Return Format
<mask_argument><NL>
<mask_argument> ::= 0,..,255; an integer in NR1 format.
See Also
•
•
•
•
Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Guide
Name Description
RQL Request Control
OPC Operation Complete
"Introduction to Common (*) Commands"
"*ESR (Standard Event Status Register)"
"*OPC (Operation Complete)"
"*CLS (Clear Status)"
When Set (1 = High = True), Enables:
Event when the device is requesting control. (Not
used.)
Event when an operation is complete.
on page 104
on page 108
on page 101
Commands by Subsystem
on page 99
5
103