Mtest:rumode:sofailure - Agilent Technologies InfiniiVision 5000 Series Programmer's Manual

7
Obsolete and Discontinued Commands

:MTESt:RUMode:SOFailure

Command Syntax
:MTESt:RUMode:SOFailure <on_off>
<on_off> ::= {{1 | ON} | {0 | OFF}}
The :MTESt:RUMode:SOFailure command enables or disables the Stop On
Failure run until criteria. When a mask test is run and a mask violation is
detected, the mask test is stopped and the acquisition system is stopped.
The :MTESt:RUMode:SOFailure command is obsolete and is provided for backward
N O T E
compatibility to previous oscilloscopes. Use the :MTESt:RMODe:FACTion:STOP command
(see
Query Syntax
:MTESt:RUMode:SOFailure?
The :MTESt:RUMode:SOFailure? query returns the current state of the Stop
on Failure control.
Return Format
<on_off><NL>
<on_off> ::= {1 | 0}
See Also •
•
604
(see page 658)
page 340) instead.
"Introduction to :MTESt Commands"
":MTESt:RUMode" on page 603
Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Guide
on page 320