Save:mask[:Start] - Agilent Technologies InfiniiVision 5000 Series Programmer's Manual

5
Commands by Subsystem

:SAVE:MASK[:STARt]

Command Syntax
:SAVE:MASK[:STARt] [<file_spec>]
<file_spec> ::= {<internal_loc> | <file_name>}
<internal_loc> ::= 0-3; an integer in NR1 format
<file_name> ::= quoted ASCII string
The :SAVE:MASK[:STARt] command saves a mask.
If a file extension is provided as part of a specified <file_name>, it must be ".msk".
N O T E
See Also •
•
•
•
366
(see page 658)
"Introduction to :SAVE Commands"
":SAVE:FILename" on page 359
":RECall:MASK[:STARt]"
":MTESt:DATA" on page 332
Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Guide
on page 358
on page 354