Trigger:can:pattern:data:length - Agilent Technologies InfiniiVision 5000 Series Programmer's Manual

:TRIGger:CAN:PATTern:DATA:LENGth

Command Syntax
:TRIGger:CAN:PATTern:DATA:LENGth <length>
<length> ::= integer from 1 to 8 in NR1 format
The :TRIGger:CAN:PATTern:DATA:LENGth command sets the number of
8- bit bytes in the CAN data string. The number of bytes in the string can
be anywhere from 0 bytes to 8 bytes (64 bits). The value for these bytes is
set by the :TRIGger:CAN:PATTern:DATA command.
This command is only valid when the automotive CAN and LIN serial decode option (Option
N O T E
AMS) has been licensed.
Query Syntax
:TRIGger:CAN:PATTern:DATA:LENGth?
The :TRIGger:CAN:PATTern:DATA:LENGth? query returns the current CAN
data pattern length setting.
Return Format
<count><NL>
<count> ::= integer from 1 to 8 in NR1 format
Errors
•
See Also
•
•
•
Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Guide
(see page 658)
"- 241, Hardware missing"
"Introduction to :TRIGger Commands"
":TRIGger:CAN:PATTern:DATA"
":TRIGger:CAN:SOURce"
on page 617
on page 411
on page 424
on page 430
Commands by Subsystem
5
425