Hweregister[:Event] (Hardware Event Event Register) - Agilent Technologies InfiniiVision 5000 Series Programmer's Manual

5
Commands by Subsystem

:HWERegister[:EVENt] (Hardware Event Event Register)

Query Syntax
:HWERegister[:EVENt]?
The :HWERegister[:EVENt]? query returns the integer value contained in
the Hardware Event Event Register.
Table 37 Hardware Event Event Register
Bit
15-13
12
11-0
Return Format
<value><NL>
<value> ::= integer in NR1 format.
See Also
•
•
•
•
•
•
138
(see page 658)
Name Description
--- ---
PLL PLL Locked
Locked
--- ---
"Introduction to Root (:) Commands"
":CHANnel<n>:PROTection"
":EXTernal:PROTection"
":OPEE (Operation Status Enable Register)"
":OPERegister:CONDition (Operation Status Condition Register)"
page 147
":OVLenable (Overload Event Enable Register)"
Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Guide
When Set (1 = High = True), Indicates:
(Not used.)
This bit is for internal use and is not intended
for general use.
(Not used.)
on page 124
on page 203
on page 225
on page 145
on page 151
on