Trigger:iic[:Source]:Data - Agilent Technologies InfiniiVision 5000 Series Programmer's Manual

5
Commands by Subsystem

:TRIGger:IIC[:SOURce]:DATA

Command Syntax
:TRIGger:IIC:[SOURce:]DATA <source>
<source> ::= {CHANnel<n> | EXTernal} for the DSO models
<source> ::= {CHANnel<n> | DIGital0,..,DIGital15} for the MSO models
<n> ::= {1 | 2 | 3 | 4} for the four channel oscilloscope models
<n> ::= {1 | 2} for the two channel oscilloscope models
The :TRIGger:IIC:[SOURce:]DATA command sets the source for IIC serial
data (SDA).
Query Syntax
:TRIGger:IIC:[SOURce:]DATA?
The :TRIGger:IIC:[SOURce:]DATA? query returns the current source for IIC
serial data.
Return Format
<source><NL>
See Also •
•
458
(see page 658)
"Introduction to :TRIGger Commands"
":TRIGger:IIC[:SOURce]:CLOCk"
Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Guide
on page 411
on page 457