Timebase:range - Agilent Technologies InfiniiVision 5000 Series Programmer's Manual

5
Commands by Subsystem

:TIMebase:RANGe

Command Syntax
:TIMebase:RANGe <range_value>
<range_value> ::= 10 ns through 500 s in NR3 format
The :TIMebase:RANGe command sets the full- scale horizontal time in
seconds for the main window. The range is 10 times the current
time- per- division setting.
Query Syntax
:TIMebase:RANGe?
The :TIMebase:RANGe query returns the current full- scale range value for
the main window.
Return Format
<range_value><NL>
<range_value> ::= 10 ns through 500 s in NR3 format
See Also
•
•
•
•
Example Code
seconds.
Example program from the start:
page 744
404
(see page 658)
"Introduction to :TIMebase Commands"
":TIMebase:MODE" on page 402
":TIMebase:SCALe" on page 406
":TIMebase:WINDow:RANGe"
' TIME_RANGE - Sets the full scale horizontal time in seconds.
' range value is 10 times the time per division.
myScope.WriteString ":TIM:RANG 2e-3"
Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Guide
on page 400
on page 409
' Set the time range to 0.002
"VISA COM Example in Visual Basic"
The
on