Trigger:spi:framing - Agilent Technologies InfiniiVision 5000 Series Programmer's Manual

:TRIGger:SPI:FRAMing

Command Syntax
:TRIGger:SPI:FRAMing <value>
<value> ::= {CHIPselect | NOTChipselect | TIMeout}
The :TRIGger:SPI:FRAMing command sets the SPI trigger framing value. If
TIMeout is selected, the timeout value is set by the
:TRIGger:SPI:CLOCk:TIMeout command.
Query Syntax
:TRIGger:SPI:FRAMing?
The :TRIGger:SPI:FRAMing? query returns the current SPI framing value.
Return Format
<value><NL>
<value> ::= {CHIPselect | NOTChipselect | TIMeout}
See Also
•
•
•
•
Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Guide
(see page 658)
"Introduction to :TRIGger Commands"
":TRIGger:MODE" on page 417
":TRIGger:SPI:CLOCk:TIMeout"
":TRIGger:SPI:SOURce:FRAMe"
Commands by Subsystem
on page 411
on page 472
on page 478
5
473