Mtest:rmode:time - Agilent Technologies InfiniiVision 5000 Series Programmer's Manual

5
Commands by Subsystem

:MTESt:RMODe:TIME

Command Syntax
:MTESt:RMODe:TIME <seconds>
<seconds> ::= from 1 to 86400 in NR3 format
When the :MTESt:RMODe command is set to TIME, the
:MTESt:RMODe:TIME command sets the number of seconds for a mask test
to run.
Query Syntax
:MTESt:RMODe:TIME?
The :MTESt:RMODe:TIME? query returns the number of seconds currently
set.
Return Format
<seconds><NL>
<seconds> ::= from 1 to 86400 in NR3 format
See Also
•
•
342
(see page 658)
"Introduction to :MTESt Commands"
":MTESt:RMODe" on page 337
Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Guide
on page 320