Agilent Technologies InfiniiVision 5000 Series Programmer's Manual page 513

<# points> ::= {100 | 250 | 500 | 1000 | <maximum # points>}
<# points> ::= {100 | 250 | 500 | 1000 | 2000 ... 8000000
If a full screen of data is not displayed, the number of points returned will not be 1000 or an
N O T E
even divisor of it.
See Also
•
•
•
•
•
•
•
Example Code
Example program from the start:
page 744
Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Guide
if waveform points mode is NORMal
in 1-2-5 sequence | <maximum # points>}
if waveform points mode is MAXimum or RAW
"Introduction to :WAVeform Commands"
":ACQuire:POINts" on page 170
":WAVeform:DATA" on page 509
":WAVeform:SOURce"
":WAVeform:VIEW" on page 528
":WAVeform:PREamble"
":WAVeform:POINts:MODE"
' WAVE_POINTS - Specifies the number of points to be transferred
' using the ":WAVEFORM:DATA?" query.
myScope.WriteString ":WAVEFORM:POINTS 1000"
on page 502
on page 521
on page 516
on page 514
"VISA COM Example in Visual Basic"
Commands by Subsystem
5
on
513