Agilent Technologies InfiniiVision 5000 Series Programmer's Manual page 146

5
Commands by Subsystem
Table 40 Operation Status Enable Register (OPEE) (continued)
Bit
5
4
3
2-0
Query Syntax
:OPEE?
The :OPEE? query returns the current value contained in the Operation
Status Enable register as an integer number.
Return Format
<value><NL>
<value> ::= integer in NR1 format.
See Also •
•
•
•
•
•
•
•
•
146
Name Description
Wait Wait Trig
Trig
--- ---
Run Running
--- ---
"Introduction to Root (:) Commands"
":AER (Arm Event Register)"
":CHANnel<n>:PROTection"
":EXTernal:PROTection"
":OPERegister[:EVENt] (Operation Status Event Register)"
":OVLenable (Overload Event Enable Register)"
":OVLRegister (Overload Event Register)"
"*STB (Read Status Byte)"
"*SRE (Service Request Enable)"
Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Guide
When Set (1 = High = True), Enables:
Event when the trigger is armed.
(Not used.)
Event when the oscilloscope is running (not
stopped).
(Not used.)
on page 124
on page 125
on page 203
on page 225
on page 153
on page 117
on page 115
on page 149
on page 151