Status - Agilent Technologies InfiniiVision 5000 Series Programmer's Manual

:STATus

Query Syntax
:STATus? <source>
<source> ::= {CHANnel<n> | FUNCtion | MATH | SBUS}
<n> ::= {1 | 2 | 3 | 4} for the four channel oscilloscope models
<n> ::= {1 | 2} for the two channel oscilloscope models
The :STATus? query reports whether the channel, function, or serial
decode bus specified by <source> is displayed.
MATH is an alias for FUNCtion.
N O T E
Return Format
<value><NL>
<value> ::= {1 | 0}
See Also
•
•
•
•
•
•
Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Guide
(see page 658)
"Introduction to Root (:) Commands"
":BLANk" on page 130
":CHANnel<n>:DISPlay"
":FUNCtion:DISPlay"
":SBUS:DISPlay" on page 380
":VIEW" on page 162
on page 124
on page 194
on page 232
Commands by Subsystem
5
159