5
Commands by Subsystem
:SAVE:WAVeform:SEGMented
Command Syntax
:SAVE:WAVeform:SEGMented <option>
<option> ::= {ALL | CURRent}
When segmented memory is used for acquisitions, the
:SAVE:WAVeform:SEGMented command specifies which segments are
included when the waveform is saved:
• ALL — all acquired segments are saved.
• CURRent — only the currently selected segment is saved.
Query Syntax
:SAVE:WAVeform:SEGMented?
The :SAVE:WAVeform:SEGMented? query returns the current segmented
waveform save option setting.
Return Format
<option><NL>
<option> ::= {ALL | CURR}
See Also
•
•
•
•
372
(see
page
658)
"Introduction to :SAVE Commands"
":SAVE:WAVeform[:STARt]"
":SAVE:WAVeform:FORMat"
":SAVE:WAVeform:LENGth"
Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Guide
on page 358
on page 369
on page 370
on page 371