Save:image:area - Agilent Technologies InfiniiVision 5000 Series Programmer's Manual

:SAVE:IMAGe:AREA

Query Syntax
:SAVE:IMAGe:AREA?
The :SAVE:IMAGe:AREA? query returns the selected image area. If the
:SAVE:IMAGe:FORMat is TIFF, the area is GRAT (graticule). Otherwise, it is
SCR (screen).
Return Format
<area><NL>
<area> ::= {GRAT | SCR}
See Also
•
•
•
•
•
•
Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Guide
(see page 658)
"Introduction to :SAVE Commands"
":SAVE:IMAGe[:STARt]"
":SAVE:IMAGe:FACTors"
":SAVE:IMAGe:FORMat"
":SAVE:IMAGe:INKSaver"
":SAVE:IMAGe:PALette"
on page 358
on page 360
on page 362
on page 363
on page 364
on page 365
Commands by Subsystem
5
361