Save:waveform:length - Agilent Technologies InfiniiVision 5000 Series Programmer's Manual

:SAVE:WAVeform:LENGth

Command Syntax
:SAVE:WAVeform:LENGth <length>
<length> ::= 100 to max. length; an integer in NR1 format
The :SAVE:WAVeform:LENGth command sets the waveform data length
(that is, the number of points saved).
Query Syntax
:SAVE:WAVeform:LENGth?
The :SAVE:WAVeform:LENGth? query returns the specified waveform data
length.
Return Format
<length><NL>
<length> ::= 100 to max. length; an integer in NR1 format
See Also
•
•
•
•
Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Guide
(see page 658)
"Introduction to :SAVE Commands"
":SAVE:WAVeform[:STARt]"
":WAVeform:POINts" on page 512
":SAVE:WAVeform:FORMat"
on page 358
on page 369
on page 370
Commands by Subsystem
5
371