Agilent Technologies InfiniiVision 5000 Series Programmer's Manual page 4

• Chapter 10,
• Chapter 11,
Finally, there is a chapter that contains programming examples:
• Chapter 12,
See Also
• For more information on using the SICL, VISA, and VISA COM libraries
• For information on controller PC interface configuration, see the
• For information on oscilloscope front- panel operation, see the User's
• For detailed connectivity information, refer to the Agilent Technologies
• For the latest versions of this and other manuals, see:
4
"Synchronizing Acquisitions"
wait for acquisitions to complete before querying measurement results
or performing other operations with the captured data.
"More About Oscilloscope Commands"
additional information about oscilloscope programming commands.
"Programming Examples"
in general, see the documentation that comes with the Agilent IO
Libraries Suite.
documentation for the interface card used (for example, the Agilent
82350A GPIB interface).
Guide.
USB/LAN/GPIB Connectivity Guide. For a printable electronic copy of
the Connectivity Guide, direct your Web browser to
and search for "Connectivity Guide".
"http://www.agilent.com/find/5000manual"
Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Guide
on page 647, describes how to
on page 657, contains
on page 679.
"www.agilent.com"