Agilent Technologies InfiniiVision 5000 Series Programmer's Manual page 21

Changed
Commands
Command
:CHANnel<n>:LABel (see
:DISPlay:LABList (see
:MARKer:MODE (see
:RECall:PWD (see
:SAVE:IMAGe[:STARt] (see
:SAVE:PWD (see
:SAVE:WAVeform[:STARt] (see
:TRIGger:CAN:SIGNal:BAUDrate (see
page
:TRIGger:LIN:SIGNal:BAUDrate (see
:TRIGger:UART:BAUDrate (see
:TRIGger:UART:DATA (see
Obsolete
Commands
Obsolete Command
:MTESt:AMASk:{SAVE |
STORe} (see
:MTESt:AVERage (see
page
:MTESt:AVERage:COUNt (see
page
:MTESt:LOAD (see
:MTESt:RUMode (see
page
:MTESt:RUMode:SOFailure
(see
Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Guide
page
page 214)
page 258)
page 355)
page
page 367)
page
429)
page
page
page 599)
600)
601)
page 602)
603)
page 604)
Differences
197) Labels can now be up to 10 characters.
Labels can now be up to 10 characters.
You can now select the WAVeform tracking
cursors mode.
You can set the present working directory in
addition to querying for this information.
360) The file extension specified will change the
:SAVE:IMAGe:FORMat setting if it is a valid
image file extension.
You can set the present working directory in
addition to querying for this information.
360) The file extension specified will change the
:SAVE:WAVeform:FORMat setting if it is a valid
waveform file extension.
The baud rate value can now be set in 100 b/s
increments.
page 465) The baud rate value can now be set in 100 b/s
increments.
488) The baud rate value can now be set in 100 b/s
increments and the maximum baud rate is now
3 Mb/s.
491) You can now specify the data value using a
quoted ASCII character.
Current Command Equivalent
:SAVE:MASK[:STARt] (see
page 366)
:ACQuire:TYPE AVERage (see
page 177)
:ACQuire:COUNt (see
page 167)
:RECall:MASK[:STARt] (see
page 354)
:MTESt:RMODe (see
page 337)
:MTESt:RMODe:FACTion:STO
P (see page 340)
What's New
Behavior Differences
1
21