Waveform:xincrement - Agilent Technologies InfiniiVision 5000 Series Programmer's Manual

:WAVeform:XINCrement

Query Syntax
:WAVeform:XINCrement?
The :WAVeform:XINCrement? query returns the x- increment value for the
currently specified source. This value is the time difference between
consecutive data points in seconds.
Return Format
<value><NL>
<value> ::= x-increment in the current preamble in 64-bit
See Also •
•
Example Code
•
Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Guide
(see page 658)
floating point NR3 format
"Introduction to :WAVeform Commands"
":WAVeform:PREamble"
"Example Code" on page 517
on page 502
on page 516
Commands by Subsystem
5
529