Agilent Technologies InfiniiVision 5000 Series Programmer's Manual page 57

Table 2 Common (*) Commands Summary (continued)
Command
n/a
*RCL <value> (see
page 110)
*RST (see page 111)
*SAV <value> (see
page 114)
*SRE <mask> (see
page 115)
Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Guide
Query
*OPT? (see page 109)
n/a
n/a
n/a
*SRE? (see page 116)
Commands Quick Reference
Options and Query Returns
<return_value> ::= 0,0,<license
info>
<license info> ::= <All field>,
<reserved>, <reserved>,
<reserved>, <reserved>,
<reserved>, <Low Speed Serial>,
<Automotive Serial>, <reserved>,
<Secure>, <reserved>,
<reserved>, <reserved>,
<reserved>,
<RS-232/UART Serial>, <reserved>
<All field> ::= {0 | All}
<reserved> ::= 0
<Low Speed Serial> ::= {0 | LSS}
<Automotive Serial> ::= {0 | AMS}
<Secure> ::= {0 | SEC}
<RS-232/UART Serial> ::= {0 |
232}
<value> ::= {0 | 1 | 2 | 3 | 4 |
5 | 6 | 7 | 8 | 9}
See *RST (Reset) (see
<value> ::= {0 | 1 | 2 | 3 | 4 |
5 | 6 | 7 | 8 | 9}
<mask> ::= sum of all bits that
are set, 0 to 255; an integer in
NR1 format. <mask> ::= following
values:
Bit Weight Name Enables
--- ------ ---- ----------
7 128 OPER Operation Status Reg
6 64 ---- (Not used.)
5 32 ESB Event Status Bit
4 16 MAV Message Available
3 8 ---- (Not used.)
2 4 MSG Message
1 2 USR User
0 1 TRG Trigger
4
page 111)
57