:SAVE:IMAGe:PALette
Command Syntax
:SAVE:IMAGe:PALette <palette>
<palette> ::= {COLor | GRAYscale | MONochrome}
The :SAVE:IMAGe:PALette command sets the image palette color.
MONochrome is the only valid choice when the :SAVE:IMAGe:FORMat is TIFF. COLor and
N O T E
GRAYscale are the only valid choices when the format is not TIFF.
Query Syntax
:SAVE:IMAGe:PALette?
The :SAVE:IMAGe:PALette? query returns the selected image palette color.
Return Format
<palette><NL>
<palette> ::= {COL | GRAY | MON}
See Also
•
•
•
•
•
•
Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Guide
(see
page
658)
"Introduction to :SAVE Commands"
":SAVE:IMAGe[:STARt]"
":SAVE:IMAGe:AREA"
":SAVE:IMAGe:FACTors"
":SAVE:IMAGe:FORMat"
":SAVE:IMAGe:INKSaver"
on page 358
on page 360
on page 361
on page 362
on page 363
on page 364
Commands by Subsystem
5
365