Measure:vmax - Agilent Technologies InfiniiVision 5000 Series Programmer's Manual

:MEASure:VMAX

Command Syntax
:MEASure:VMAX [<source>]
<source> ::= {CHANnel<n> | FUNCtion | MATH}
<n> ::= {1 | 2 | 3 | 4} for the four channel oscilloscope models
<n> ::= {1 | 2} for the two channel oscilloscope models
The :MEASure:VMAX command installs a screen measurement and starts a
maximum vertical value measurement. If the optional source parameter is
specified, the current source is modified.
Query Syntax
:MEASure:VMAX? [<source>]
The :MEASure:VMAX? query measures and outputs the maximum vertical
value present on the selected waveform.
Return Format
<value><NL>
<value> ::= maximum vertical value of the selected waveform in
See Also
•
•
•
•
•
Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Guide
(see page 658)
NR3 format
"Introduction to :MEASure Commands"
":MEASure:SOURce"
":MEASure:VMIN" on page 310
":MEASure:VPP" on page 311
":MEASure:VTOP" on page 315
on page 272
on page 297
Commands by Subsystem
5
309