Trigger:uart:burst - Agilent Technologies InfiniiVision 5000 Series Programmer's Manual

5
Commands by Subsystem

:TRIGger:UART:BURSt

Command Syntax
:TRIGger:UART:BURSt <value>
<value> ::= {OFF | 1 to 4096 in NR1 format}
The :TRIGger:UART:BURSt command selects the burst value (Nth frame
after idle period) in the range 1 to 4096 or OFF, for the trigger when in
UART mode.
Query Syntax
:TRIGger:UART:BURSt?
The :TRIGger:UART:BURSt? query returns the current UART trigger burst
value.
Return Format
<value><NL>
<value> ::= {OFF | 1 to 4096 in NR1 format}
See Also
•
•
•
•
490
(see page 658)
"Introduction to :TRIGger Commands"
":TRIGger:MODE" on page 417
":TRIGger:UART:IDLE"
":TRIGger:UART:TYPE"
Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Guide
on page 411
on page 492
on page 498