Agilent Technologies InfiniiVision 5000 Series Programmer's Manual page 79

Table 16 :SBUS Commands Summary (continued)
Command
n/a
:SBUS:UART:FRAMing
<value> (see
page 390)
Table 17 :SYSTem Commands Summary
Command
:SYSTem:DATE <date>
(see page 392)
:SYSTem:DSP <string>
(see page 393)
n/a
:SYSTem:LOCK <value>
(see page 395)
:SYSTem:PROTection:LO
CK <value> (see
page 396)
:SYSTem:SETup
<setup_data> (see
page 397)
:SYSTem:TIME <time>
(see page 399)
Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Guide
Query
:SBUS:UART:COUNt:TXFR
ames? (see page 389)
:SBUS:UART:FRAMing?
(see page 390)
Query
:SYSTem:DATE? (see
page 392)
n/a
:SYSTem:ERRor? (see
page 394)
:SYSTem:LOCK? (see
page 395)
:SYSTem:PROTection:LO
CK? (see page 396)
:SYSTem:SETup? (see
page 397)
:SYSTem:TIME? (see
page 399)
Commands Quick Reference
Options and Query Returns
<frame_count> ::= integer in NR1
format
<value> ::= {OFF | <decimal> |
<nondecimal>}
<decimal> ::= 8-bit integer from
0-255 (0x00-0xff)
<nondecimal> ::= #Hnn where n ::=
{0,..,9 | A,..,F} for hexadecimal
<nondecimal> ::= #Bnn...n where n
::= {0 | 1} for binary
Options and Query Returns
<date> ::= <year>,<month>,<day>
<year> ::= 4-digit year in NR1
format
<month> ::= {1,..,12 | JANuary |
FEBruary | MARch | APRil | MAY |
JUNe | JULy | AUGust | SEPtember
| OCTober | NOVember | DECember}
<day> ::= {1,..31}
<string> ::= up to 254 characters
as a quoted ASCII string
<error> ::= an integer error code
<error string> ::= quoted ASCII
string.
See Error Messages (see
page 615).
<value> ::= {{1 | ON} | {0 |
OFF}}
<value> ::= {{1 | ON} | {0 |
OFF}}
<setup_data> ::= data in IEEE
488.2 # format.
<time> ::= hours,minutes,seconds
in NR1 format
4
79