Save:filename - Agilent Technologies InfiniiVision 5000 Series Programmer's Manual

:SAVE:FILename

Command Syntax
:SAVE:FILename <base_name>
<base_name> ::= quoted ASCII string
The :SAVE:FILename command specifies the source for any SAVE
operations.
This command specifies a file's base name only, without path information or an extension.
N O T E
Query Syntax
:SAVE:FILename?
The :SAVE:FILename? query returns the current SAVE filename.
Return Format
<base_name><NL>
<base_name> ::= quoted ASCII string
See Also
•
•
•
•
•
•
Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Guide
(see page 658)
"Introduction to :SAVE Commands"
":SAVE:IMAGe[:STARt]"
":SAVE:SETup[:STARt]"
":SAVE:WAVeform[:STARt]"
":SAVE:PWD" on page 367
":RECall:FILename" on page 352
on page 358
on page 360
on page 368
on page 369
Commands by Subsystem
5
359