Site Requirements; Physical Operating Environment; Power Connection - Christie D13WU2-HS User Manual

Site requirements

To safely install and operate the projector, the installation location must have restricted access for
authorized personnel only and meet these minimum requirements.

Physical operating environment

Provides specifications for the operating environment.
• Ambient temperature (operating): 0°C to 40°C (32°F to 104°F) up to 2500 ft
• Humidity (non-condensing): 10% to 85% RH
• Operating altitude: 10,000 ft maximum at 0°C to 30°C ambient temperature

Power connection

The projector uses an AC power system that allows the projector to operate at full brightness with a
power supply of 200 to 240 VAC, depending on the models and regions. Operating the device
outside of the voltage range may cause unsatisfactory operation or damage to the projector.
Christie recommends a 20 A rated wall breaker for the installation. To ensure safety operation, only
use the AC power cord provided with the product or recommended by Christie.
Model name
D13WU2-HS/D13HD2-HS
D16WU-HS/D16HD-HS
D20WU-HS/D20HD-HS
HS Series 2K User Manual — D13HD2-HS, D13WU2-HS, D16HD-HS, D16WU-HS, D20HD-HS, D20WU-HS
020-001466-06 Rev. 1 (12-2022)
Copyright ©2022 Christie Digital Systems USA Inc. All rights reserved.
Power requirements
120 - 240 VAC, 50/60 Hz, 12 A
200 - 240 VAC, 50/60 Hz, 7 A (rated for China, India, Taiwan, and Korea)
100 VAC, 50/60 Hz, 13 A, 1200 W (rated for Japan)
120 - 240 VAC, 50/60 Hz, 12 A
200 - 240 VAC, 50/60 Hz, 7 A (rated for China, India, Taiwan, and Korea)
200 VAC, 50/60 Hz, 7 A, 1250 W (rated for Japan)
200 - 240 VAC, 50/60 Hz, 9 A
Introduction
17