Product documentation
For installation, setup, and user information, see the product documentation available on the Christie
Digital Systems USA Inc. website. Read all instructions before using or servicing this product.
Boxer 4K, Boxer 2K, Boxer 30
1. Access the documentation from the Christie website:
•
Go to http://bit.ly/2mpf6QK or
https://www.christiedigital.com/en-us/business/products/projectors/3-chip-dlp/boxer-
series
•
Scan the QR code using a QR code reader app on a smartphone or tablet.
2. On the product page, select the model and switch to the Downloads tab.
Related documentation
Additional information on the projector is available in the following documents.
•
Boxer 4K Installation and Setup Guide (P/N: 020-101902-XX)
•
Boxer Product Safety Guide (P/N: 020-101780-XX)
•
Boxer 4K Service Guide (P/N: 020-101699-XX)
•
Boxer 4K Serial Commands Guide (P/N: 020-101697-XX)
•
Boxer 4K Status System Guide (P/N: 020-101695-XX)
Site requirements
To safely install and operate the projector, the installation location must have restricted access for
authorized personnel only and meet these minimum requirements.
Physical operating environment
Provides specifications for the operating environment.
•
Ambient temperature (operating) 5 to 40°C (41 to 104°F) up to 457.2 m (1500 feet)
•
Humidity (non-condensing) 10 to 80%
•
Operating altitude: 3,000 m (10,000 feet) maximum at 5 to 25°C (41 to 77°F) ambient
Boxer 4K User Guide–Boxer 4K20 (Bb.4) and Boxer 4K30 (Bb.1)
020-101777-16 Rev. 1 (05-2023)
Copyright
©
2023 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Introduction
14