Related Documentation; Site Requirements; Physical Operating Environment; Power Connection - Christie Crimson Series User Manual

2. On the product page, select the model and switch to the Downloads tab.

Related documentation

Additional information on the projector is available in the following documents.
• Crimson Series Installation and Setup Guide (P/N: 020-102647-XX)
Crimson Series Product Safety Guide (P/N: 020-102648-XX)
•
• Crimson Series Specifications Guide (P/N: 020-102724-XX)
Crimson Series Service Guide (P/N: 020-102733-XX)
•
Crimson Series Serial Commands Guide (P/N: 020-102660-XX)
•
• Crimson Series Status System Guide (P/N: 020-102661-XX)

Site requirements

To safely install and operate the projector, the installation location must have restricted access for
authorized personnel only and meet these minimum requirements.

Physical operating environment

Provides specifications for the operating environment.
• Crimson and Mirage HD25K/WU25K: Ambient temperature (operating) 5 to 40°C (41 to 104°
F) up to 457.2 m (1500 feet)
• Crimson HD31K/WU31K/WU32K: Ambient temperature (operating) 5 to 40°C (41 to 104°F)
up to 304.8 m (1000 feet)
• Humidity (non-condensing) 10 to 80%
• Operating altitude: 3,000 m (10,000 feet) maximum at 5 to 25°C (41 to 77°F) ambient

Power connection

The projector uses an innovative dual AC inlet power system that offers two power modes.
To operate at full brightness, power the projector using AC Input 1 if the appropriate high power
source is available. To operate in limited power mode, power the projector using standard lower power
sources using AC Input 2. A different power cord is provided for each power source. A 20 A rated wall
breaker is required at the installation when using Input 1. A 15 A rated wall breaker is required at the
installation when using Input 2.
Crimson Series User Guide
020-102649-07 Rev. 1 (05-2023)
Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Introduction
16