Installation And Setup; Site Requirements; Physical Operating Environment; Power Connection - Christie Inspire Series User Manual

Installation and setup

Learn how to install, connect, and optimize the projector display.

Site requirements

To safely install and operate the projector, the installation location must have restricted access for
authorized personnel only and meet these minimum requirements.

Physical operating environment

Provides specifications for the operating environment.
• Ambient temperature (operating): 0 to 40°C (32 to 104°F) up to 762 m (2500 feet)
• Humidity (non-condensing): 10% to 85% RH
• Operating altitude: 3048 m (10,000 feet) at 0 to 30°C (32 to 86°F) ambient temperature

Power connection

The projector uses an AC power system that allows the projector to operate at full brightness with a
power supply ranging from 100 to 240 VAC, depending on the models and regions. Operating the
device outside of the voltage range may cause unsatisfactory operation or damage to the projector.
Christie recommends a 20 A rated wall breaker for the installation. To ensure safe operation, only
use the AC power cord provided with the product or recommended by Christie.

Physical specifications

Learn the dimensions and weight of the projector before installation.
• Projection size (L x W x H): 480 x 406 x 157 mm (18.8 x 15.9 x 6.1 inches)
• Shipping size (L x W x H): 650 x 570 x 380 mm (25.5 x 22.4 x 14.9 inches)
• Weight:
• 4K860-iS/4K860A-iS: 14.7 kg (32.4 lbs)
• Shipping weight:
• 4K860-iS/4K860A-iS: 18.85 kg (41.4 lbs)
Inspire Series 4K User Manual
020-002098-01 Rev. 1 (09-2023)
Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
17