Installation And Setup; Site Requirements; Physical Operating Environment; Power Connection - Christie HS 2K Series User Manual

Installation and setup

Learn how to install, connect, and optimize the projector display.

Site requirements

To safely install and operate the projector, the installation location must have restricted access for
authorized personnel only and meet these minimum requirements.

Physical operating environment

Provides specifications for the operating environment.
Item
Ambient temperature (operating)
Storage temperature range
Humidity range
Storage humidity range
Operating altitude

Power connection

The projector uses an AC power system allowing the projector to operate at full brightness with a
power supply of 100 to 240 VAC. Operating the device outside of the voltage range may cause
unsatisfactory operation or damage to the projector. To ensure safety operation, only use the AC
power cord provided with the product or recommended by Christie.
Model name
DWU15-HS / DWU15A-HS
DWU19-HS/DWU19A-HS
DWU23-HS/DWU23A-HS
HS Series 2K User Manual
020-002040-01 Rev. 1 (05-2023)
Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Specification
0 to 40°C (32 to 104°F) for 0 to 762 meters (0 to 2500 feet)
0 to 35°C (32 to 95°F) for 762 to 1524 meters (2500 to 5000 feet)
0 to 30°C (32 to 86°F) for 1524 to 3048 meters (5000 to 10,000 feet)
-10 to 60°C (14 to 140°F)
10% to 85% RH (maximum), non condensing
5% to 90% RH (maximum), non condensing
3048 meters (10,000 feet) maximum
Power requirements
100-240VAC, 50/60Hz, 10A
• 200-240VAC, 50/60Hz, 6.5A
• 110VAC, 50/60Hz, 12A for US only
200-240VAC, 50/60Hz, 8.5A
19