Installation And Setup; Site Requirements; Physical Operating Environment; Power Connection - Christie APS Series User Manual

Installation and setup

Learn how to install, connect, and optimize the projector display.

Site requirements

To safely install and operate the projector, the installation location must have restricted access for authorized
personnel only and meet these minimum requirements.

Physical operating environment

This provides specifications for the operating environment.
Item
Ambient temperature (operating)
Storage temperature range
Humidity range
Storage humidity rang
Operating altitude

Power connection

The projector uses an AC power system allowing the projector to operate at full brightness with a power
supply of 100 to 240 VAC. Operating the device outside of the voltage range may cause unsatisfactory
operation or damage to the projector. To ensure safety operation, only use the AC power cord provided with
the product or recommended by Christie.
Model name
LWU605ST-APS
LWU505ST-APS

Projector components

Identify the main components of the projector.

Front view

Identify the main components on the front of the projector.
APS Series User Manual
020-002086-01 Rev. 1 (05-2023)
Copyright 2023 Christie Digital Systems USA, Inc. All rights reserved.
©
If printed, please recycle this document after use.
Specification
LWU505ST-APS: 0 to 40°C (32 to 104°F)
LWU605ST-APS: 5 to 40°C (41 to 104°F)
-10 to 50°C (14 to 122°F)
20% to 80%
10% to 85%
3000 meters (9842.5 feet)
Power requirements
100-240 VAC, 50/60 Hz, 4.5 A maximum
100-240 VAC, 50/60 Hz, 3.0 A maximum
10