Zero Point Offset Function Block; Table 23 Reference Values For Ramps; Figure 23 Startup Ramp: 100 % In 100 Ms; Figure 24 Startup Ramp: 100 % In 10,000 Ms - WAGO 750 Product Manual

Functions
Activity
Normal operation
JOG/TIP mode
STOP function

4.4.2.3 Zero Point Offset Function Block

This function block can be used to compensate for a constant offset error in the propor-
tional valve.
The offset value to be used can be specified with the "NP_OFFSET" parameter in
rameter Tables 174 and 175
−20.00 %.
48 Product manual | Version: 1.1.0
Proportional Valve Module 2-3-4
Figure 24: Startup ramp: 100 % in 10,000 ms
Ramps
Four rising and falling ramps each
1
1
[} 42]. Values can be set between +20.00 % and
750-1632/000-100
Figure 23: Startup ramp: 100 % in 100 ms
Table 23: Reference Values for Ramps
Reference Value
Nominal current
Nominal current
Nominal current
Figure 25: Zero Point Offset Function Block
8 Pa-