Table of Contents
Advertisement
Commissioning
10.2.3 WAGO IO-Link Configurator
10.2.3.1 System Requirements
The following system requirements must be met for the WAGO I/O Field configuration
software to be installed:
Minimum System Requirements
Components
Operating system
Memory
Free hard disk space
Processor
Screen resolution
Recommended System Requirements
Components
Operating system
Memory
Free hard disk space
Processor
Screen resolution
10.2.3.2 Launching WAGO IO-Link Configurator
10.2.3.2.1 Operation as a Standalone Program
WAGO IO-Link Configurator can be launched as a standalone program from the Start
menu or with the desktop icon, or in connection with WAGO I/O-CHECK. It then provides
the functions necessary for connecting to accessible WAGO IO-Link masters or searching
for them.
WAGO IO-Link Configurator offers the following functions, depending on the WAGO IO-
Link master and setting:
• Diagnostics, identification, parameterization and display of process data of WAGO IO-
Link devices
• Writing output process data
This normally the controller's job, and the tool cannot write here concurrently. How-
ever, some WAGO IO-Link masters can also be operated on the tool without a PLC. In
this case, the tool can also write the process data. In particular, this applies to some
ETHERNET-based WAGO IO-Link masters. You can tell this when the WAGO IO-Link
master opens or read about it in the corresponding documentation.
• Configuring the WAGO IO-Link master or Field I/O module
94
Product manual | Version: 2.1.0
8PORT IOL-B FLD PN DC 24V 2.0A
Table 57: Minimum System Requirements
Requirements
Windows 7 (32- and 64-bit)
Windows 8 (32- and 64-bit)
Windows 8.1 (32- and 64-bit)
Windows 10 (32- and 64-bit)
2 GB
150 MB
1 GHz or higher, 32-bit (x86) or 64-bit (x64)
800 × 600 pixels
Table 58: Recommended System Requirements
Requirements
Windows 10 (64-bit)
8 GB
250 MB
1 GHz or higher, 64-bit (x64)
1920 × 1080 pixels
765-4102/0100-0000
Advertisement
Chapters
Table of Contents
