System Info; Standard Di, Ro - ABB ACS580 Firmware Manual

150 Parameters
No. Name/Value
06.33 MSW bit 14
selection
False
True
Other [bit]
07

07 System info

07.03 Drive rating id
07.04 Firmware name
07.05 Firmware version
07.06 Loading package
name
07.07 Loading package
version
07.11 Cpu usage
0...100%
10

10 Standard DI, RO

10.02 DI delayed status
0000h...FFFFh
10.03 DI force selection
Bit Value
0 1 = Force DI1 to value of bit 0 of parameter
1 1 = Force DI2 to value of bit 1 of parameter
2 1 = Force DI3 to value of bit 2 of parameter
3 1 = Force DI4 to value of bit 3 of parameter
4 1 = Force DI5 to value of bit 4 of parameter
5 1 = Force DI6 to value of bit 5 of parameter
6...15 Reserved
0000h...FFFFh
Description
Selects a binary source whose status is transmitted as bit 14
(User bit 3) of 06.11 Main status
0.
1.
Source selection (see Terms and abbreviations
Drive hardware and firmware information.
All parameters in this group are read-only.
Type of the drive/inverter unit.
Firmware identification.
Version number of the firmware.
Name of the firmware loading package.
Version number of the firmware loading package.
Microprocessor load in percent.
Microprocessor load.
Configuration of digital inputs and relay outputs.
Displays the status of digital inputs DI1...DI6. Bits 0...5 reflect
the delayed status of DI1...DI6.
This word is updated only after a 2 ms activation/deactivation
delay. When the value of a digital input changes, it must
remain the same in two consecutive samples, that is for 2 ms,
for the new value to be accepted.
This parameter is read-only.
Delayed status of digital inputs.
The electrical statuses of the digital inputs can be overridden
for eg. testing purposes. A bit in parameter
data is provided for each digital input, and its value is applied
whenever the corresponding bit in this parameter is 1.
Note: Boot and power cycle reset the force selections
(parameters 10.03 and 10.04).
Override selection for digital inputs.
word.
on page 136). -
10.04 DI forced
10.04 DI forced data.
10.04 DI forced data.
10.04 DI forced data.
10.04 DI forced data.
10.04 DI forced data.
10.04 DI forced data.
Def/FbEq16
False
0
1
-
-
-
-
-
-
1 = 1%
-
1 = 1
0000h
1 = 1