ABB ACS580 Firmware Manual page 27

To view the details of a parameter that cannot be
adjusted via the I/O menu, press
To adjust the value of a parameter, press
(Edit), adjust the value using
keys and press (Save). Note that the actual
wiring must match the new value.
Go back to the Main menu by pressing
(Back) repeatedly.
After making the additional adjustments and
checking the I/O connections, use the
Diagnostics menu to make sure that the setup is
functioning correctly.
In the Main menu, select Diagnostics and press
(Select) (or ).
Select the diagnostics item you want to view and
press (Select).
Return to the Diagnostics menu by pressing
(Back).
Start-up, control with I/O and ID run 23
(View).
, , and
4 – Diagnostics menu