System Info - ABB ACS850 Firmware Manual

78 Parameters
No. Name/Value
08.07 Alarm word3
Bit Name
0 Enc2 cable
1 D2D comm
2 D2D buffer ol
3 PS comm
4 Restore
5 Curr meas calib
6 Autophasing
7 Earthfault
8 Autoreset
9 Motor nom value
10 D2D config
11 Stall
12 Load curve
13 Load curve conf
14 U/f curve conf
15 Speed meas
08.08 Alarm word4
Bit Name
0 Option comm loss
1 Solution prog
2 Motor temp2
09

09 System info

09.01 Drive type
09.02 Drive rating id
09.03 Firmware id
09.04 Firmware ver
09.05 Firmware patch
09.10 Int logic ver
Description
Alarm word 3. For possible causes and remedies, see
chapter Fault tracing.
Alarm word 4. For possible causes and remedies, see
chapter Fault tracing.
Drive type, program revision and option slot occupation
information.
Displays the drive type (for example, ACS850).
Displays the inverter type (ACS850-xx-...) of the drive.
0 = Unconfigured, 101 = 03A0, 102 = 03A6, 103 = 04A8,
104 = 06A0, 105 = 08A0, 106 = 010A, 107 = 014A,
108 = 018A, 109 = 025A, 110 = 030A, 111 = 035A,
112 = 044A, 113 = 050A, 114 = 061A, 115 = 078A,
116 = 094A, 117 = 103A, 118 = 144A, 119 = 166A,
120 = 202A, 121 = 225A, 122 = 260A, 123 = 290A,
124 = 430A, 125 = 521A, 126 = 602A, 127 = 693A,
128 = 720A
Displays the firmware name. E.g. UIFI.
Displays the version of the firmware package in the drive, e.g.
E00F hex.
Displays the version of the firmware patch in the drive.
Displays the version of the logic on the main circuit board of
the drive.
FbEq
-
-
-
1 = 1
-
-
1 = 1
-