For active faults and warnings, see
• Menu - Diagnostics - Active faults
• Menu - Diagnostics - Active warnings
• Options - Active faults
• Options - Active warnings
• parameters in group
For previously occurred faults and warnings, see
• Menu - Diagnostics - Fault & event log
• parameters in group
The event log can also be accessed (and reset) using the Drive composer PC tool.
See Drive composer PC tool user's manual (3AUA0000094606 [English]).
QR code generation for mobile service application
A QR code (or a series of QR codes) can be generated by the drive for display on the
control panel. The QR code contains drive identification data, information on the
latest events, and values of status and counter parameters. The code can be read
with a mobile device containing the ABB service application, which then sends the
data to ABB for analysis. For more information on the application, contact your local
ABB service representative.
To generate the QR code, select Menu - Primary settings - System info - QR code.
04 Warnings and faults
04 Warnings and faults
(page 142).
(page 142).
Fault tracing 359