Control Interfaces; Programmable Analog Inputs; Programmable Analog Outputs; Programmable Digital Inputs And Outputs - ABB ACS580 Firmware Manual

Control interfaces



Programmable analog inputs

The control unit has two programmable analog inputs. Each of the inputs can be
independently set as a voltage (0/2...10 V) or current (0/4...20 mA) input by a switch
on the control unit. Each input can be filtered, inverted and scaled.
Settings
Parameter group 12 Standard AI


Programmable analog outputs

The control unit has two current (0...20 mA) analog outputs. Each output can be
filtered, inverted and scaled.
Settings
Parameter group 13 Standard AO


Programmable digital inputs and outputs

The control unit has six digital inputs.
Digital input DI6 can be used as a frequency input.
Six digital inputs can be added by using a CHDI-01 115/230 V digital input extension
module and one digital output by using a CMOD-01 multifunction extension module.
Settings
Parameter groups
(page 154).


Programmable frequency input and output

Digital input (DI6) can be configured as a frequency input. A frequency output can be
implemented with a CMOD-01 multifunction extension module.
Settings
Parameter groups
(page 154).


Programmable relay outputs

The control unit has three relay outputs. The signal to be indicated by the outputs can
be selected by parameters.
Two relay outputs can be added by using a CMOD-01 multifunction extension module
or a CHDI-01 115/230 V digital input extension module.
(page 156).
(page 160).
10 Standard DI, RO
10 Standard DI, RO
(page 150) and 11 Standard DIO, FI, FO
(page 150) and 11 Standard DIO, FI, FO
Program features 93