ABB ACS580 Firmware Manual page 187

No. Name/Value
20.26 Jogging 1 start
source
Not selected
Selected
DI1
DI2
DI3
DI4
DI5
DI6
Timed function 1
Timed function 2
Timed function 3
Supervision 1
Supervision 2
Supervision 3
Other [bit]
20.27 Jogging 2 start
source
Description
If enabled by parameter
source for the activation of jogging function 1. (Jogging
function 1 can also be activated through fieldbus regardless
of parameter 20.25.)
1 = Jogging 1 active.
Notes:
• Jogging is supported in vector control mode only.
• If both jogging 1 and 2 are activated, the one that was
activated first has priority.
• This parameter cannot be changed while the drive is
running.
0.
1.
Digital input DI1 (10.02 DI delayed
Digital input DI2 (10.02 DI delayed
Digital input DI3 (10.02 DI delayed
Digital input DI4 (10.02 DI delayed
Digital input DI5 (10.02 DI delayed
Digital input DI6 (10.02 DI delayed
Bit 0 of 34.01 Combined timer status
Bit 1 of 34.01 Combined timer status
Bit 2 of 34.01 Combined timer status
Bit 0 of 32.01 Supervision status
Bit 1 of 32.01 Supervision status
Bit 2 of 32.01 Supervision status
Source selection (see Terms and abbreviations
If enabled by parameter
source for the activation of jogging function 2. (Jogging
function 2 can also be activated through fieldbus regardless
of parameter 20.25.)
1 = Jogging 2 active.
For the selections, see parameter
source.
Notes:
• Jogging is supported in vector control mode only.
• If both jogging 1 and 2 are activated, the one that was
activated first has priority.
• This parameter cannot be changed while the drive is
running.
20.25 Jogging enable, selects the
status, bit 0).
status, bit 1).
status, bit 2).
status, bit 3).
status, bit 4).
status, bit 5).
(see page 240).
(see page 240).
(see page 240).
(see page 234).
(see page 234).
(see page 234).
on page 136). -
20.25 Jogging enable, selects the
20.26 Jogging 1 start
Parameters 183
Def/FbEq16
Not selected
0
1
2
3
4
5
6
7
18
19
20
24
25
26
Not selected