ABB ACS580 Firmware Manual page 181

No. Name/Value
DI3
DI4
DI5
DI6
Timed function 1
Timed function 2
Timed function 3
Supervision 1
Supervision 2
Supervision 3
Other [bit]
20.04 Ext1 in2 source
20.05 Ext1 in3 source
20.06 Ext2 commands
Not selected
In1 Start
In1 Start; In2 Dir
Description
Digital input DI3 (10.02 DI delayed
Digital input DI4 (10.02 DI delayed
Digital input DI5 (10.02 DI delayed
Digital input DI6 (10.02 DI delayed
Bit 0 of 34.01 Combined timer status
Bit 1 of 34.01 Combined timer status
Bit 2 of 34.01 Combined timer status
Bit 0 of 32.01 Supervision status
Bit 1 of 32.01 Supervision status
Bit 2 of 32.01 Supervision status
Source selection (see Terms and abbreviations
Selects source 2 for parameter
For the available selections, see parameter
source.
Selects source 3 for parameter
For the available selections, see parameter
source.
Selects the source of start, stop and direction commands for
external control location 2 (EXT2).
See also parameters 20.07...20.10. See parameter
the determination of the actual direction.
No start or stop command sources selected.
The source of the start and stop commands is selected by
parameter 20.08 Ext2 in1
source bits are interpreted as follows:
State of source 1 (20.08)
0 -> 1 (20.07 = Edge)
1 (20.07 = Level)
0
The source selected by
signal; the source selected by
determines the direction. The state transitions of the source
bits are interpreted as follows:
State of source 1
(20.08)
0
0 -> 1 (20.07 = Edge)
1 (20.07 = Level)
status, bit 2).
status, bit 3).
status, bit 4).
status, bit 5).
(see page 240).
(see page 240).
(see page 240).
(see page 234).
(see page 234).
(see page 234).
on page 136). -
20.01 Ext1 commands.
20.03 Ext1 in1
20.01 Ext1 commands.
20.03 Ext1 in1
source. The state transitions of the
Command
Start
Stop
20.08 Ext2 in1 source is the start
20.09 Ext2 in2 source
State of source 2
(20.09)
Any
0
1
Parameters 177
Def/FbEq16
4
5
6
7
18
19
20
24
25
26
DI2
Not selected
Not selected
20.21 for
0
1
2
Command
Stop
Start forward
Start reverse