Frequency Reference Chain - ABB ACS580 Firmware Manual

No. Name/Value
26.74 Torque ref ramp out
-1600.0...1600.0%
26.75 Torque reference
act 5
-1600.0...1600.0%
28
28 Frequency reference
chain
28.01 Frequency ref ramp
input
-500.00...500.00
Hz
28.02 Frequency ref ramp
output
-500.00...500.00
Hz
Description
Displays the torque reference after limiting and ramping. See
the control chain diagram on page 427.
This parameter is read-only.
Torque reference after limiting and ramping.
Displays the torque reference after control mode selection.
See the control chain diagram on page 429.
This parameter is read-only.
Torque reference after control mode selection.
Settings for the frequency reference chain.
See the control chain diagrams on pages
Displays the used frequency reference before ramping. See
the control chain diagram on page 430.
This parameter is read-only.
Frequency reference before ramping.
Displays the final frequency reference (after selection,
limitation and ramping). See the control chain diagram on
page 430.
This parameter is read-only.
Final frequency reference.
Parameters 213
Def/FbEq16
-
See par.
46.03
-
See par.
46.03
430 and 421.
-
See par.
46.02
-
See par.
46.02