Parameters
Contents of this chapter
This chapter describes the service level parameters and signals of the ACS880 Cavitation
detection control program.
Terms and abbreviations
See ACS880 primary control program firmware manual (3AUA0000085967[English]).
Parameter listing
This supplement lists only the parameters that are relevant to the ACS880 Cavitation
detection control program.
07 System info
■
No.
Name/Value
07
System info
07.21
Application environ-
ment status 1
Pre task
Appl task1
Appl task2
Appl task3
Reserved
Task monitoring
07.23
Application name
Description
Information on the drive hardware, firmware and control program.
All parameters in this group are read-only.
Shows which tasks of the application program are running. For
this program, only Appl task2 must be running.
1 = Pre-task running.
1 = Task 1 running.
1 = Task 2 running.
1 = Task 3 running.
1 = Task monitoring enabled.
Shows the first five ASCII letters of application name.
Parameters 23
3
Def/FbEq16
0004h
0
1
2
3
4...14
15
ACPRT